OctoPi Laser Serveur
Révision datée du 3 octobre 2022 à 13:58 par Tomi (discussion | contributions)
Guide on how to install OctoPrint onto an SD Card etc.:
https://octoprint.org/download/
On the RPi, we have installed rpi-clone:
https://github.com/billw2/rpi-clone
rpi-clone is a tool that can clone a live/booted SD Card to another SD Card (USB reader) and that is directly bootable after the cloning process.
Backup The OctoPi to USB SD Card
- Open the command line interface
- Type
ssh pi@172.18.149.26
... and connect to the RPi server. - Make sure the USB SD Card reader is plugged in and is working. Make sure the SD Card is at least the same size as the RPi System Card.
(Default: the RPi System Card is 16 GB and the USB SD Card is 16 GB.) - Type
sudo rpi-clone sda -v -u
Make sure that "sda" is the correct destination. If not sure, check with :sudo fdisk -l
- Wait until it is finished.
Boot From SD Card Clone
- Remove the system SD Card
- Remove the clone SD card from the USB reader.
- Insert the SD from the USB reader to the RPi system SD slot.
- Power up the RPi